Welcome to Zeeable   Click to listen highlighted text! Welcome to Zeeable

Category: *Year 9

IGCSE 2016 May Ms Excel Practical
IGCSE ICT Practical-Ms Access
IGCSE Physics Practical-Specific Heat Capacity
IGCSE Art Tips

Hi everyone. In the video below you will find important tips on how to get an A*/ level 9 for IGCSE for the subject of Art.

Top Mistakes You Should Avoid In Your Economics Paper
  • The use of the word

Often candidates in Economics exams, they often say that things will happen and we have an example here; the lowering of taxes will lead to a rise in GDP and unemployment will therefore fall. We can’t assume these things.

For example, lowering taxes could lead to a rise in GDP. All the things in the economy might happen to lead to a fall in GDP, so we can’t be 100% certain that things will actually always happen. So, we should really change the sentence to lowering taxes should lead to a rise in GDP, and unemployment could possibly fall or is likely to fall. This shows a lack of understanding of the economy; not everything, a certain. 99.999% at the time all factors are not held the same. So, nothing can be presumed.

  • The use of examples

So, the second mistake often people make is by drawing a diagram and then they give little or no explanation on the diagonal; just throw it in there, you will usually get little credit for this.

So, we’ve gone through about always being precise and also don’t always assume that some fingers demand or supplied normally as is here. Often things are supplied very inelastically. So, for example the supply of wheat is inelastic if demand for the week goes or not. A whole lot of weeks can be supplied because it takes a long time for that. Week to actually grow so you need to consider the elasticities when drawing your supply and demand curves.

Try to avoid rambling through large blocks of text. Often a lot of candidates see a question and then they go off on a large tangent about things that generally interest them but they aren’t actually answering the question. So, for example, a quick question here explains the reasons for the growth in GDP. So, start by answering the question, why one reason for a growth of GDP is because this and specifically honed in on the question and therefore you’re sort of answering the question and then the examiner can’t help.

We’ll give you marks. Also, remember if it doesn’t answer the question, you won’t gain any credit. So, you might be going against some really complex in-depth analysis of something. But, it’s not linked to the question. The examiner can’t reward you lastly.

One mistake that some candidates make is by being too controversial or biased. Avoid presenting radicals, socially transforming ideologies such as Marxism. In your essays, even if you think that they’re correct in under 40 minutes, you’ll probably not going to be able to find the time to justify your argument fully, and also there are some other reasons for avoiding going down. The route of becoming too radical. You probably won’t be answering the question directly. So, you’ll be rumbling on for a topic that doesn’t directly link the question as previously discussed and you could also lead the risk of the examiner disagreeing with you in agitating him and he could mark you harshly and you need to remember that they’re only human.

There’s something that annoys them subconsciously, they could more. You doubt one to two marks for something that they don’t agree with you how hardline. So, always try to give both sides of the argument. You probably haven’t considered your argument fully.

Remember you’re only an old student, you’re not a Ph.D researcher. So, don’t try and get too ahead of yourself.

Stay tuned with Zeeable for more of such updates and news!!

Gradient of graphs

Hi everyone!! The discussion below is based on finding the gradient of straight lines. It is mainly aimed at benefiting those sitting for GCSE exams. Good luck, guys!!

Mathematics A 2019 Jan 2H paper discussion

Hi, everyone!! Below is a discussion of Mathematics A 2019 January 2H Paper. The discussion is mainly centered on the following topics:

  • Probability
  • Venn Diagram
  • Area
  • HCF and LCM
  • Compound interest
  • Speed
  • Simultaneous equations
  • Algebra
  • Volume
  • Surface Area
  • Histograms
  • Geometry
  • Graphs

Stay tuned with Zeeable for more of such updates and news!!

Micropropagation/Tissue Culture

If you already have an animal or plant with all the characteristics you want, then it would be ideal just to make loads and loads of identical copies of it. That is what cloning is making; genetically identical copies of organisms. This is done naturally in nature by organisms that do asexual reproduction by mitosis that produce exactly identical organisms.

Only one parent; there are no gametes involved, there is no mix in genetic information and all. The ostrich Ashley identical to each other so that is a type of cloning. Asexual reproduction; another type of cloning that done very easily is taking cuttings from plants has been done for hundreds of years. Gardeners take a separ cut off a stem from a plant that they particularly like and they stick that stem of the plant in the ground and it will grow into the same as their parent.

Plants though can be cloned now in a much more commercial scale by a more scientific process called tissue culture. Now, this is a sophisticated scientific technique which can produce thousands of clones in a short space of time and it’s known as micro propagation. The way you do it is; you find the plant you want with the desired characteristics. First growers can then just take a few plant cells from the tips of the shoots or the roots. We call these ex plants then they sterilize them to clean a micron ism’s and they place them in a little petri dish containing nutrient medium. They say they are grown in vitro. What we mean by that is in a lab outside the normal biological context, this nutrient medium contains all the growth hormones and the nutrients for the shoots and the roots to start growing.

So, just from a few tiny cells, you can start to get these tiny little plants. Growing the shoots are then removed from those initial ex plants. Once they get going and you can then move those to another Petrich and keep repeating it and repeating and repeating or repeating it. So, from one original plant you can end up getting thousands of ex plants which then will grow under optimal conditions into full size plants which can then be transferred into compost and into greenhouses to develop fully. They will all be identical to the original plant. Again, this is done all the way around the world in order to maximize the yield of certain crops such as bananas.

Now, there’s some good things about cloning plants. You get large quantities of plants very quickly. You can grow plant all year round. You can clone a bit rare or endangered plants to increase populations. New plants grown in sterile conditions so they’re pests and disease free.

If you did genetic engineering on a plant first and then cloned it, you would enough to do genetic engineering again. Because you’ve only had to do that complex process once and then you just clone that one of those at times. However, all the offspring are identical genetically and that means they are very vulnerable to diseases. You also need sterile lab facilities and they’re also really vulnerable to pests.

Stay tuned with Zeeable for updates and news!!

Cloning will generate more human organs

The ability to create a clone used to be science fiction. Dr. Ian Wilmut’s group changed that in 1997 with the creation of Dolly the sheep. Since then, the debate on applying the technique to clone human beings has been ongoing.

Based on all the discussion, it may sound like cloning, human or otherwise, is an easy process.  

Simply put, clones are organisms that have identical genetic material. In other words, the sequence of bases in their DNA is exactly the same. Long before the birth of Dolly the sheep, clones had been observed in both nature and in the laboratory. When a couple has identical twins (or identical triplets, etc.), the children are clones of one another. A plant cutting can also be used to generate a clone.

Prior to 1996, it was thought that cloning an entire animal could only be done with embryonic cells; cells present in the early stages of an organism’s development. In the 1950s, scientists generated entire frogs from embryonic frog cells. After a small number of cell divisions, embryonic cells start to change into the different types of cells that an organism needs,  including cells that form muscle, blood, liver, etc. This process is called differentiation.

Although each of these cells has the same genetic material, each cell can only access the genes needed for its particular function. Before the experiment at the Roslin Institute, it was thought that once cells differentiated, they could not be used to generate an entire organism. For instance, in a sheep, udder cells could generate other udder cells, but not an entire sheep. The scientists at the Roslin Institute solved this problem by growing sheep udder cells under starvation conditions. This put the cells in a state similar to embryonic cells. This is called the G0 state.

An egg cell was taken from another sheep. The nucleus, which contains the genetic material, was removed from the egg cell using a very fine needle. They then used electric shock to fuse one starved udder cell with one nucleus-free egg cell. They made 277 of these fused cells. Although the egg cell came from a black-faced sheep, notice that the nucleus with the genetic material came from the white-faced sheep. These fused egg cells were then inserted into several different sheep. These surrogate mothers were also black-faced. Of the 277 fused cells, only one progressed to form a developed lamb.

Dolly was born on July 5, 1996. Scientists found that Dolly had the same DNA as the udder cells she came from. She is a clone of these udder cells. Dolly has given birth to a lamb named Bonnie, produced the natural way. Other lambs have been born at the Roslin Institute through their cloning process; some carry genes that will produce usable human drugs. A laboratory in Hawaii run by Dr. Ryuzo Yanagimachi was the second group to successfully clone an animal from an adult cell. They cloned mice using cumulus cells, a cell type found in the ovaries. The cloning method used by the lab in Hawaii was different in two ways from the method used to clone Dolly.

First, the cells used to clone the mice were not grown in culture, but instead were used immediately. Second the nucleus was removed from the cumulus cell and then directly injected into the egg cell. This egg cell’s nucleus had already been removed. The Yanagimachi lab used coat color to track genetic heritage. The cumulus cell comes from an agouti (brown) mouse, and the egg cell comes from a black mouse. The egg cell now had the same genetic information as the nucleus donor mouse. The egg cell was then activated and implanted into a white host mother.

On October 3, 1997, the host mouse gave birth to Cumulina, named after the cumulus cells she was cloned from. Cumulina is the same color as the mouse that donated the nucleus. DNA fingerprinting confirmed that Cumulina had the same DNA as the nucleus donor. The scientists have taken cells from Cumulina to make more clones. They have successfully made several generations of clones and all mice seem normal.

Dolly the sheep died at the age of six. Since the world said hello to Dolly, several other animals have also been cloned. Both Dolly and Cumulina were cloned from cells in the female reproductive system; cows have also been cloned using ovary and cumulus cells with the same method that was used to clone Dolly. Pigs have been added to the cloned animal menagerie.

Scientists hope to use cloned pigs to grow organs that can be transplanted into humans.

Stay tuned with Zeeable for more of such updates and news!!

Sectors of Business

There are three sectors that you need to know in business. They’re primary, secondary and tertiary. 

Primary sector-That’s about extracting raw materials. For example of that could be fishing,agriculture or mining for any sorts of natural resource. 

Secondary sector– That’s about manufacturing goods. You’re thinking here factories or it could beconstruction. Build buildings or it could be building infrastructure; so roads, train tracks, etc. 

Tertiary sector- Tertiary sector is about providing services. They could be retail services; banking services, there’s so many example of services in our economy which leads me to statistics- statisticsyou could use for an evaluation point.  The UK is heavily loaded towards a tertiary sector. 79% of our economy; the UK economy based on current data is tertiary sector, 20% is in the secondary sector and only 1% is in the primary sector.

Click to listen highlighted text!